Видео

Thanks for your question! The MotoCoat is specifically designed for automotive coatings, including primers, basecoats, and topcoats, but it will generally perform well with metallic black paints. Always make sure to read the user manual before use and adjust the settings for the specific paint viscosity.

The frequency of steam cleaning your bathroom depends on several factors such as how frequently the bathroom is used, how quickly it gets dirty, and your personal cleaning preferences. As a good rule of thumb, deep steam cleaning your bathroom once every couple of weeks or so can help maintain cleanliness and hygiene✨💛

Thanks for your insight! The appropriate temperature setting depends on the task you are performing and the material you are working with. Higher temperatures in this range are better for more demanding tasks👍

Great question! To keep the sprayer in tip top shape we recommend cleaning the sprayer right after every use. However, there may be times when you need to finish your project the next day. In that case you can leave your material in the sprayer over night in a cool dry area. After leaving it overnight make sure to wipe off any dried material that may have dried on the nozzle. Make sure you mix up the material that was left in the container, as it has settled overnight. Make sure to clean it very well at the end of your project.

Thank you for your comment! We always recommend returning any remaining paint to your paint can first. Then, you should fill the paint cup with the appropriate cleaning solution. For water-based paints, use warm, soapy water; for oil-based materials, use mineral spirits. Instead of cleaning directly over a drain, you can use a bucket or container to catch the cleaning solution and any residue. Let us know if you have any more questions!

We recommend around 650 degrees Fahrenheit for best results. Depending on your car and the level of cloudiness, you may consider using a sander before heat.

Thank you for your question and reaching out! The 915 steamer comes with a child proof locking fill cap. You have to push down hard while twisting it counterclockwise. If you continue to have a problem removing it, please let us know and we are happy to continue help troubleshooting!

We appreciate your feedback! We always recommend being cautious when tackling a project like this by starting on a lower heat setting and gradually increasing as needed. It is important to make sure you do not hold the heat gun too close to the headlight.

Thank you for your question! Thompson's wood sealers work great with Wagner sprayers, since they offer both oil-based stains and water-based products. These airless sprayers do not require thinning, but they do require the correct tip size. The maximum tip size for the Control Pro 130 is .015", which is the 515 that comes with the package. Tip size information is usually found on the back of the can. Let us know if you have any more questions! Happy staining!😀

Hi there, thanks for your question! What type of project do you have in mind? The FLEXiO 3500 is great for a wide range of interior and exterior painting projects such as interior walls, fences, decks, kitchen cabinets, furniture and more. The FLEXiO 4300 can be used to paint or stain everything from siding and trim to kitchen cabinets and crafts.

I paint chicken coops that I make on the weekend. I make them out of 2x2's I have used the 3500 before but I was just wondering if the 4300 is an upgrade or a substantial upgrade or anything like that or is it just lighter?

We're so glad to hear you like this steamer! 😀😊

Thank you for your question! On the Control Pro series, you can use extensions up to 24”, but the hose itself is a 25-foot hose. It does not differ between paint and stains 😀🎨Happy painting!

Thank you for your feedback. The large tent does not have the fan/filter set up like the small tent does so it cannot be set up the same way, but you can add a standard 20” window box fan and a 20” x 20” MERV filter (level 8 or greater) for ventilation. We're here to help!

Hi, thanks for your comment. There are a few things you can do to paint/stain to ensure it sprays well. 1 - Stir the paint/stain with a mixer in a drill until its creamy smooth, about 1 min per gallon 2 - Strain the paint/stain before it goes into the sprayer 3 - Add a flow agent, like Floetrol or Paint Easy (this is not a thinner) for latex paint - Penetrol for oil based 4 - Or you can thin, even as little as 5% can make a big difference, water for water based materials and mineral spirit for oil based material. Up to 20% is fine. The settings also factor in. You should be spraying from 6-10" away. Keep the air power at maximum and reduce the paint flow to eliminate spitting and stripe patterns.

@@Wagner-Spraytech thank you,but how low doi reduce the paint flow? I have try all the settings positions and ,not luck yet!.

For the Detail Finish Nozzle, set the air power at maximum and reduce paint flow to eliminate spitting, increase paint flow to increase pattern width. Spray from 6" away and apply a wet coat with each pass. Not three passes to get it wet. Lay the project down, if you can, and spray down onto it. Gravity will help it level. Please let us know if you need more help troubleshooting!

Thanks for your question! The Flexio 4000 comes with two nozzles. The iSpray nozzle is for your fence, deck and walls and it will leave a roller like texture when using thick materials. The Detail Finish nozzle is for your trim, furniture and cabinets and it can leave a fine finish when using thin or thinned materials. Also, there are a few things you can do to paint/stain to ensure it sprays well. 1 - Stir the paint/stain with a mixer in a drill until its creamy smooth, about 1 min per gallon 2 - Strain the paint/stain before it goes into the sprayer 3 - Add a flow agent, like Floetrol or Paint Easy (this is not a thinner) for latex paint - Penetrol for oil based 4 - Or you can thin, even as little as 5% can make a big difference, water for water based materials and mineral spirits for oil based material. Up to 20% is fine. Please let us know if you have any more questions. We're here to help!

@@Wagner-Spraytech Thank you for your response ,but my problem is when I m spraying with the detail finish.I do stir well,I do strain it every time ,and I do add like 15% water,for a better spraying ,I set the air pressure to 7-8 ,and the paint flow to medium flow, I paint with a 6 inches away from the furniture ,but still something is making lines , cloudy foggy lines🫤. The texture is beautiful , but those sheens on the top of my dressers are very annoying .Help please!

For the Detail Finish Nozzle, set the air power at maximum and reduce paint flow to eliminate spitting, increase paint flow to increase pattern width. Spray from 6" away and apply a wet coat with each pass. Not three passes to get it wet. Lay the project down, if you can, and spray down onto it. Gravity will help it level. Please let us know if you need more help troubleshooting!

We're sorry to hear that. All Wagner Spraytech tools come with a minimum 1-year factory warranty. Please contact us for help at 1-800-328-8251. We're here to help you troubleshoot.

We're so glad to hear you like this product! One thing we love about the 915e Steamer: versatility! It can be used for a variety of household projects😀🧽

Thank you for your comment! Usually, this can be caused by a buildup of pressure or an improper seal; for safety, the cap won't come off until the inside pressure has dropped. When you're done using your steamer, let it cool off for about 30 minutes then pull the trigger to release any pressure left in the hose. This will ensure the steamer is completely cool and depressurized before attempting to open or troubleshoot the cap. Let us know if you need any more troubleshooting tips. We're here to help!

Thank you for your question. We do not recommend using this to remove window tint, as this is primarily for wallpaper removal. However, our Wagner heat guns can be used to shrink window tint--they are great for many projects! Always follow the product manual instructions and take necessary safety precautions when working with window tint or any other materials👍

We're so happy to hear this was helpful! Thanks for sharing. Happy painting🎨😀

We're sorry to hear that. Before you unscrew any of the parts on the front end, you must unplug the sprayer and relieve the pressure by slowly unscrewing the paint container. Make sure all parts are aligned and connecting nut is tight. We're here to help you troubleshoot and get back to your home projects. Please contact us for help at 1-800-328-8251. We appreciate your feedback.

Thank you for your question! The FLEXiO 2500 comes with the iSpray Nozzle, which is ideal for big surface projects such as spraying walls, sheds, fences. There is a Detail Finish Nozzle sold separately (0529013), which is used on fine finishing projects such as spraying cabinets, furniture, doors, trim etc. It will provide a smoother, finer finish than the iSpray Nozzle. The FLEXiO 3500 includes both of these nozzles, so that may suit your project needs👍Happy painting!🎨😀

Thank you for your question! When we refer to "light household oil" for maintenance of the Wagner Control Pro 130 Paint Sprayer, we mean a lightweight, non-detergent oil typically used for lubricating small household appliances or tools. Examples of light household oils include: - Sewing machine oil - 3-in-1 oil - Mineral oil Canola oil or other cooking oils are not recommended as they can become sticky and may not provide the proper lubrication needed for your paint sprayer. If you have any other questions or need further assistance, feel free to reach out to our customer support team at 1-800-328-8251 or email support@wagner-group.com. We're here to help!

It sounds like you're having trouble removing the cap after heating the unit. Here are some tips that might help: 1. Cool Down Period: It's important to allow the steamer to cool down before attempting to remove the cap. The pressure inside the unit can make the cap difficult to remove when it's hot. 2. Safety Mechanism: The cap is designed with a safety mechanism to prevent it from being removed while the unit is pressurized. This is to ensure safe operation and avoid any risk of burns or injury. 3. Proper Refilling Procedure: Always make sure the steamer is unplugged and has cooled down completely before refilling it. This ensures that there is no pressure buildup inside the tank. If you've tried these steps and are still experiencing issues, there might be a problem with the cap itself. In this case, please contact our customer support team at 1-800-328-8251 or email support@wagner-group.com for further assistance. We're here to help ensure you have a smooth and safe experience with your Wagner 915e Steamer.

Hello, we're sorry you didn't like the music choice. The text on screen is meant to describe the step by step procedure so we hope that helps.

Thank you for your feedback. We're sorry to hear about your negative experience with declouding headlights. The Wagner FURNO Heat Gun can effectively decloud headlights. However, it's important to: 1. Maintain a Safe Distance: Keep the heat gun at a safe distance from the headlight lens to avoid overheating and potential cracking. 2. Keep the Gun Moving: Constantly move the heat gun in a sweeping motion to distribute heat evenly. 3. Use Proper Settings: Use the recommended heat settings as outlined in our user manual. If you’re unsure or uncomfortable using the heat gun for this purpose, it may be best to seek professional assistance. We appreciate your concern and will review the content to ensure it provides clear and safe instructions. If you have any further questions or need assistance, please contact our customer support team at 1-800-328-8251 or email support@wagner-group.com. Thank you for your input and for helping us improve our content.

We appreciate your feedback and we understand the Wagner Large Spray Shelter can be challenging to assemble. For easier setup, you might want to consider our smaller spray tents, which offer the convenience of automatic pop-up features. If you need help, our customer support is available at 1-800-328-8251 or support@wagner-group.com.

Thank you for your feedback on both comments! We understand the assembly of the Wagner Large Spray Shelter can be challenging and often easier with two people. For additional help, please reach out to our customer support team at 1-800-328-8251 or support@wagner-group.com. We're here to assist you and ensure you have a positive experience with our products.

Hi there! It sounds like there might be an issue with a seal or internal component like the valve or spring, especially since you've cleaned it already. I recommend reaching out to Wagner's customer support for a diagnosis or to inquire about a warranty or part replacement. Hope that helps and your sprayer is back in action soon!

Yes, you can use oil-based stains with a paint sprayer, but make sure your sprayer is compatible with oil-based products. Always check the manufacturer's instructions for your specific model to ensure proper use and cleaning methods. It’s also a good idea to use a filter when filling the sprayer to avoid clogging with any debris from the stain. Happy staining!

You make a great point! The technique shown in the video is ideal for smaller projects where precision is key, like doors or trim. For larger areas like walls, you might consider using a different nozzle or adjusting the settings on your Wagner FLEXiO 4300 for a wider spray pattern and faster coverage. Each project may require a bit of tweaking to get the best results. Thanks for your insight!

You can usually find the white microfiber bonnet for the seat/upholstery attachment of the Wagner 905e at major hardware stores or online retailers. For the specific part number, it's best to check the user manual or Wagner’s official website to ensure you get the correct accessory. If you have trouble finding it, Wagner’s customer service can also guide you directly. Happy cleaning!

Hello! We're thrilled to hear you're interested in the Wagner SMART Mini Roller! You can easily purchase this handy tool on our website or through various retailers both online and in-store. To find the most convenient purchasing option for you, please visit our website at Wagner SprayTech. If you have any more questions or need further assistance, feel free to reach out to our customer support team. Happy painting! 🎨

To purchase Wagner products in Turkey, I recommend contacting our authorized dealers in the region. You can also visit our website and check the "Where to Buy" section for more information on local retailers and distributors. If you need further assistance, feel free to reach out to our customer support team at support@wagner-group.com. We're here to help you find the right products for your projects!

I'm sorry to hear about the trouble with your Wagner Control Pro 130. Here are a few steps to help resolve the issue: Check for Clogs: Ensure no clogs in the nozzle, hose, or gun. Follow the cleaning instructions in the video. Inspect and Clean the Nozzle and Tip: Paint can dry inside these parts, blocking the flow. Verify Assembly: Double-check that all components are correctly assembled and secure. If these steps don’t fix the problem, please contact our customer support team at 1-800-328-8251 or email support@wagner-group.com for further assistance. We're here to help ensure your project is a success!

To lubricate the O-rings on your Wagner FLEXiO sprayer, follow these steps: Disassemble the relevant parts to access the O-rings, as per the instruction manual. Clean the O-rings and their areas to remove any debris. Apply a silicone-based lubricant evenly on the O-rings. Reassemble the parts, ensuring the O-rings are properly seated. Regular lubrication helps maintain your sprayer’s performance. For further details, check your user manual or contact our customer support team.

Yes, replacement guns/wands are available for the Wagner 915e Steamer. You can find them on our website or through authorized Wagner retailers. If you need help selecting the right replacement or have any other questions, feel free to contact our customer support team at 1-800-328-8251 or email support@wagner-group.com. We're here to help ensure you have everything you need for your projects!

We're so glad to hear that you're loving your Wagner product! Thank you for your trust and support. It’s our pleasure to help, and we're thrilled to be part of your projects. If you ever need more tips or guidance, feel free to reach out. Happy painting!

That's wonderful to hear! It's always exciting to learn about the versatile ways our customers use Wagner products. Using the steam cleaner for wallpaper removal is indeed a fantastic tip. Thank you for sharing your experience, and we're thrilled that you're getting great results. Keep exploring all the different ways you can put your steam cleaner to work around the house!

Hello! Thanks for choosing the Wagner FLEXiO 3500. You're absolutely correct about the importance of paint viscosity; it is crucial for optimal performance. The FLEXiO 3500 is designed to handle a variety of paints and stains, but for thicker materials, thinning may be necessary according to the manufacturer’s recommendations on the paint can. If you need guidance on thinning or have any questions as you set up, feel free to reach out. We're here to help and look forward to hearing about your experience. Happy painting!

@@Wagner-Spraytech I actually found a few video's about thinning with the Wagner and followed her guide lines, which I started @ 10%.(Behr Exterior paint, was very thick) That worked out very well. I painted both my single garage doors. They came out very nice!! I think the bad reviews on Wagner 3500, people are just lazy to read/ search the proper way to used this stray gun. You must know what all the setting do. I am NOT a professional Painter. Very happy with the Product!

Thank you for sharing your positive experience with the Wagner FLEXiO 3500 Paint Sprayer! It's great to hear that adjusting the paint consistency worked well for your garage doors. Your success highlights how understanding the settings can lead to professional-quality results, even for beginners. We appreciate your feedback and look forward to seeing your future projects! Happy painting!

Great tip! It's indeed important to protect your plants from any paint overspray. Removing plants from their planters during painting or covering them carefully can prevent any harmful substances from leaching into the soil. Thanks for pointing that out-keeping our green friends safe is key to a successful patio makeover! If you have any more questions or need tips for your painting projects, feel free to ask. Happy painting!

We're thrilled to hear that your experience with the Wagner PowerTex Texture Sprayer has been so positive! Thank you for trusting Wagner for your projects over the years. If you ever need tips, support, or want to explore more ways to use your sprayer, we're just a message away. Happy spraying!

Thank you for your feedback! We understand that seeing the sprayer's effect on different colors and finishes can be helpful. We'll consider incorporating more varied backgrounds and paint colors in our future demonstrations to better showcase the capabilities and finish quality of the Wagner FLEXiO sprayers. If you have any specific questions or need further assistance, feel free to reach out. We're here to help ensure you get the best results with your projects!

That's often true, but we're here to help you make sure your projects look fantastic up close, too! Using a Wagner paint sprayer for your kitchen cabinets not only speeds up the process but also helps achieve a smooth, professional finish. If you need tips on getting the best results or have any questions about the process, feel free to reach out. We're here to ensure your cabinets look great at every distance!

Great choice with your Wagner sprayer! No need to thin paint or stain for most of our models, but it's best to check your sprayer's manual for specific guidelines. For your redwood fence, a clear stain can beautifully preserve its natural look while offering protection. Need more help? Our customer support team is just a call away at 1-800-328-8251 or email support@wagner-group.com. Happy painting!

@@Wagner-Spraytech thank you is just that i see lots of videos that tells people to thin paint and stain before painting or staining

You're absolutely right; thinning advice varies widely, which can be confusing. Many Wagner sprayers are designed to handle various paint and stain viscosities without thinning, making your projects simpler and more straightforward. Always checking the manual for your specific model is the best approach, as it provides detailed instructions tailored to your sprayer. If you have any more questions or need assistance with your project, don't hesitate to reach out to us. We're here to ensure your painting and staining goes smoothly!

Absolutely, practicing first is a great approach! Using the Wagner FURNO Heat Gun on headlights requires a steady hand and even movement to avoid overheating any spot. Glad to hear you're getting the hang of it! If you have any more questions or need tips, we're here to help.

It's great to hear your Wagner sprayer streamlined your project! To tackle the dusty residue, consider fine-tuning the spray settings and ensuring the area is well-ventilated. For more detailed guidance or other inquiries, our support team is ready to assist at 1-800-328-8251 or support@wagner-group.com. Enjoy your painting projects!

The Wagner SMART Sidekick is designed for efficiency and ease, allowing for continuous painting with less refilling. If you're experiencing slower performance, it could be related to the paint viscosity or the speed setting. For optimal results, ensure the paint is adequately thinned according to the manufacturer's recommendations and adjust the speed settings as needed. If you continue to face issues, our customer support team is here to assist at 1-800-328-8251 or support@wagner-group.com.

The Wagner PowerTex is ideal for wall and ceiling textures like orange peel and popcorn. For Multispec countertop textures, it's crucial to match the material's consistency with the sprayer's capabilities. We recommend consulting the manufacturer's guidelines or contacting our customer support at 1-800-328-8251 or support@wagner-group.com for specific advice on your project's needs.